How to Unbrick Xiaomi Redmi Note 3 (Snapdragon 650)

48

Hello People, In this post, you will be able to Unbrick your Xiaomi Redmi Note 3 (Snapdragon Variants)

So you have tried to Unlock bootloader and went into boot loop

I wonder that xiaomi Redmi Note 3 Official Bootloader Only works on MIUI 8 Developer Version ROM and not on Global Version but mobile ships with Global Stable Rom

Below are the Steps to Unbrick Your Redmi Note 3:

 

Note: Before proceeding, Please Do at your Own Risk and we do not responsible for any kind of damages happen to your device

If your Device is totally bricked, Bootlooped or Pattern Locked:

1.First, you have to Enter EDL Mode on Your Redmi Note 3 (Click Here)

Now your phone shows RED LED Flashing Notification

Now it’s time to Flash Redmi Note 3 Firmware

2.For Flashing Rom you have to Install Qualcomm Drivers (Click Here)

3.Disable the Driver Signature on your Windows PC (Click Here)

4.Download the ROM From Here

5.Download the MI Flash Tool

After downloading the ROM extract and copy it to your Local Disk – C Drive on a New Folder Like Eg. C:/Xiaomi/here.

Now Open the MI Flash tool

Select the ROM Folder C:/Xiaomi/.. (Where your downloaded ROM extracted and saved)

Select the ROM Folder and Flash the Firmware…

Click Flash to Unbrick your Xiaomi Redmi Note 3

Wait for the Flashing Finishes.

That’s all Guys, Now Remove the USB Cable and Boot Your Device it will Take Some time to Bootup…Enjoy

Comments